Caterpillar was the first to design and manufacture high pressure hydraulic hose known throughout the industry as XT hose. XT hose standards far exceed industry standards still today. XT hose is impulse tested to one million cycles - twice the industry requirement - at 133% of working pressure using both new and aged hose.

This hose shall consist of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic fiber reinforcement, and a hydraulic fluid and weather resistant thermoplastic cover. Specification: Metric Size SAE Dash Size ID Min ID Max OD Max Max Working Pressure MPa Min Bend Radius 3.2 -2 3.4 4.0 9.5 21 25 5 -3 4.6 5.4 11.4 21 90

Constant Pressure - Made to ISO 18752 specifications, and YKR2SN - 2SN/R2AT 2-WIRE YOKOHAMA PREMIUM HYDRAULIC HOSE. FOR MEDIUM AND HIGH PRESSURE LINES 

This hose shall consist of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic fiber reinforcement, and a hydraulic fluid and weather resistant thermoplastic cover. Specification: Metric Size SAE Dash Size ID Min ID Max OD Max Max Working Pressure MPa Min Bend Radius 3.2 -2 3.4 4.0 9.5 21 25 5 -3 4.6 5.4 11.4 21 90

Bridgestone Global Website

Hydraulic hose - SAE standards (.PDF Download). Feb. 2, 2016. SAE 100R1 hose should be used with petroleum- and water-based hydraulic fluids, 

Jul 17,  · The maximum working pressure of a hose assembly comprising SAE J517 hose and hose connectors per SAE J516, SAE J518, SAE J1453, etc., shall not exceed the lower of the respective SAE maximum working pressure values. When using SAE J517 hose for marine applications, refer to SAE J1475, SAE J1942, and SAE J1942-1.

Hose Information—The Government Specification and the Custodian of the Specification should be consulted for infor-mation regarding the use of the hoses. 6. Internal Abrasion—For applications of a highly abrasive nature where the hose makes one or more bends, hose should be rotated 90° periodically to lengthen service life.

hydraulic hose products, couplings and crimping equipment. There is the argument that hoses branded with the same SAE specification are the same and can 

Refer to SAE J517 for specifications of hose and information on hose assemblies. Reinforcement: 2 high-tensile steel wire braids. Selection The following is a list of factors SPEC

Dash Numbers, the industry standard, describe hose and coupling size. This number precedes the hose or coupling description (see table on page 6). Dash numbers 

The following publications form a part of this specification to the extent specified herein. The latest issue of SAE publications shall apply. 2.1.1 SAE 

Construction and Specifications 7 Hydraulic Hose Selection Operating Ranges 8 Features and Fittings 9 Hydraulic Hose Section A Synflex Hose Part Number Information A2–3 Low Pressure Hose A4 Hydraulic Hose 3R30 -- -- 120 1,750 103 1,500 -- -- 86 1,250 70 1,000 -- -- -- -- -- --

SAE 100R16 Hydraulic Hose (R16) (con't) D100 D165 D205 71 Series Hose Fittings crimp full shell 3/4" R17-12 1.330" (33.8 mm) D100-31MM D100-31MM D200-31MM 2.80 1" R17-16 1.702" (43.20 mm) D100-43MM D100-43MM D200-43MM 0.20 Hydraulax™ TOUGH Hydraulic Hose (HT) D100 D165 D205 Braided / U Series Hose Fittings

J517_201612. This SAE Standard provides general, dimensional and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series

Hydraulic Industry Standard Industry standards set specific require- ments concerning construction type, size, tolerances, burst pressure, and impulse cycles. Available in either

Construction: This hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather 

Hydraulic Rubber & Thermoplastic Hose Notes: specification reference: SAE 100 R17 - ISO 11237 - EN HYDRAULIC FITTING // STANDARD // HOse MenDer.

Textile Braid Hydraulic Hoses. Balflex® hydraulic textile braid hoses are produced to Balflex® specifications and according to ISO 4079, 

Crimp Specifications Hose Fitting Hose I.D. Product Code Crimp Diameter +/- .005" (0.13 mm) Recommended Die Set Select the die for your crimper below Micrometer Setting SAE 100R3 General Purpose/Hydraulic Hose (R3) D100 D165 D205 Braided / U Series Hose Fittings crimp to knurl 1/4" R3-04 0.615" (15.60 mm) D100-14MM D100-14MM D200-14MM 1.60

Standards. : Meet and exceeds EN856 TYPE 4SH. SPIRAL WIRE HOSE. SPIRAL WIRE HOSE. 02. UNICAL PRODUCT CATALOGUE. HYDRAULIC HOSES